Brick Machine Strip Brush

The use of brick machine strip brush:

1. It is used to clean the supporting plate and supporting wheel of the brick machine.

2. Remove debris, mud, etc. stuck to the conveyor belt.

3. Clean the surface of the conveyor belt and guide rails.

4. Clean the pulley and bearing seat of the conveyor belt.

5. Clean up the impurities, soil, etc. in the conveyor roller table.

6. Clean the roller and bearing seat of the belt tensioner.

7. Clean the working surface of the belt conveyor and keep it clean to prevent foreign objects from entering the machine and causing damage or affecting the working performance; At the same time, daily maintenance of the transmission system is carried out to ensure the normal operation of the equipment;

8. Replace the seriously worn pulleys and belts.

9. Adjust the tension force to make the belt in good working condition;

10. Check and adjust the bolts of each part to make the body reach the running state;

11. Regularly carry out comprehensive overhaul and maintenance of the machine to ensure that it is in good operating condition.

How to Use:

1. Place the brush on the tile machine to fix the position.

2. Use a wooden hammer to knock on the rubber roller sleeve.

3. Take the brush out of the rubber roller sleeve.

4. Insert the bristles down into the tape.

5. Press the switch.

6. Turn on the motor.

7. Start working normally.

8. When the machine is stopped, turn off the power first, then turn off the fan, and then stop the motor.

9. After shutting down, please pour out the remaining materials in the hopper.

10. After each new adhesive tape, it should be rinsed with water in time.

11. It is strictly forbidden to touch the brush head directly with your hands.

12. It is forbidden to work in a high temperature environment.

13. If you find a fault, please contact us in time.