Small concrete block machine

Small concrete block machine

Small concrete block machines are machines used for making concrete blocks in small quantities. These machines are designed for small-scale production and are usually used by individuals, small businesses, or DIY enthusiasts. They typically have a small footprint and can produce a few hundred to a few thousand blocks per day, depending on the model and the operator's skill. Small concrete block machines are popular in rural areas, where there is a strong demand for affordable housing and construction materials. They are also used in urban areas, where space is limited, and there is a need for small-scale construction projects.

Small concrete block machine uses a large amount of waste residue. The brick products produced are one of the new wall materials and are strongly supported by the state. As long as you have local, slag, slag, lime sand, steel slag, gravel, tailings, sand, stone powder, construction waste, etc., select one or two of them, add 8% of cement, the right amount of water, you can use to make concrete products, our technical department will provide you with reasonable block making formula to ensure the quality of concrete products. 

The materials used in the Small concrete block machine are relatively simple, and the raw materials are relatively abundant, easy to obtain, and the price is low. In addition, this equipment effectively protects China's precious land resources and also realizes the reuse of resources, such as waste. slag, construction waste, etc., can be converted into building materials through the equipment, thereby realizing the recycling of resources. To this end, the state has introduced many relevant policies to vigorously support the development and improvement of the cement block market.

QT3-15 Small concrete block machine

Small concrete block machine Technical Specification

Small concrete block machine Main Features

◇ The extensive use of raw materials, such as Sand, stone and cement can be used to add a large amount of industrial waste such as fly ash, slag, steel slag, coal gangue, ceramsite and perlite.
 
◇ The classic vibration mode is especially suitable for the production of high-strength blocks and standard bricks. The molding cycle is short and the efficiency is high.
 
◇ The control system uses PLC liquid crystal display man-machine interface, remote control, automatic fault diagnosis, and targeted application software to make its operation more intelligent.
 
◇ The high-efficiency vibrator has strong excitation force and better compaction effect.
◇ Forced mechanical positioning, fast and uniform material, accurate and consistent product.

In order to ensure that our products are always in good working condition during the use process, the company has made the following service requirements on the basis of strictly implementing GB/T1678.1-1997 "industrial products after-sales service" standards:
1. The warranty period is 12 months or 2000 hours.
2. Freely train the operation, maintenance and management personnel for the customer.
3. Respond to relevant customer inquiries in a timely manner.
4. Provide relevant documents and materials to customers.
5. Perform product quality responsibility and provide on-site services such as installation, commissioning and maintenance to customers in a timely manner.
6. Create customer files and track product usage.
7. After the contract takes effect, the customer is responsible for the construction of the supporting facilities and foundation pre-buried by the company, and the main cable is led to the main cabinet; the water source is led to the mixer. Our company provides the complete machine certificate for the equipment.
8. After the customer base is self-accepted, if the customer does not have the conditions to force installation or needs to be re-installed, the customer should sign in writing and the company will charge the corresponding fee.
9. Due to partial improvement and process improvement under the contract, our company has the right to make new designs and improvements without degrading the performance of the original equipment. If the physical object of the contract is different from the contract information, the actual product shall prevail, but the quality level of the equipment shall not be lowered.