Block Machine Equipment

Block Machine Equipment

Block Machine Equipment is a multifunctional mechanical equipment for the production of concrete bricks, solid bricks, and hollow bricks. The equipment is usually made of high-strength steel and is equipped with an electric motor and hydraulic system to produce bricks of different sizes and shapes. In the production process, the concrete material enters the container through the feeding system, and undergoes processes such as high pressure and vibration to form bricks with strength and stability. Block Machine Equipment can use a variety of materials to make bricks, such as clay, plaster, sand, gypsum, etc., and can provide high-quality brick materials for different kinds of construction projects. Block Machine Equipment has the advantages of intelligence, high efficiency and low cost, and is one of the indispensable equipment in the production process of modern construction engineering.

The main machine adopts the vertical directional compound vibration mode of the extreme speed frequency conversion amplitude modulation base; the vibration isolation system adopts the air cushion suspension mode; the frequency conversion, amplitude, and the special vibration motor can change the rotating magnetic field; the wall blocks can be formed (high load-bearing, non-bearing wall blocks), small Standard blocks and special  blocks(curbstones, slope protection stones, etc.)

Equipments for fully automatic concrete block making plant:

This configuration realizes full-process control, no operator on the mixer, and is equipped with cement metering, water metering, cement screw and pneumatic door opening and unloading system. The Sancang batching equipment adopts the medium-level cutting technology to ensure that the raw materials are still unloaded smoothly under damp conditions. Sancang is the conveyor unloading. Our company also has a swaying screening device, which can accurately weigh and mix a variety of raw materials according to the set ratio, and will not meet the requirements in the weighing process. The large aggregate is peeled off. The weighing is accurate, and the mixed raw materials are conveyed to the mixer. The cement metering and water metering on the mixer realizes accurate measurement of cement and water. At the same time of metering, the mixer stirs the various raw materials, and finally discharges the mixed raw materials into the storage hopper of the conveyor belt through the pneumatic system, waiting for the brick making of the bricks, and the whole brick making process is controlled by the brick making machine. Full control, saving labor, improving efficiency and improving the quality of finished products.

Block Machine Equipment Main features:

1. Our machine has a very compact structure, uses high special steel and advance heat treatment, leading to a long lifespan

2. Omron PLC control system, WEINVIEW touch screen and Shneider electric parts ensure stable and reliable performance, also can be remotely operated and monitored

3. Uses “YUKEN” proportional and directional valves, which is able to adjust the oil flow and pressure catering to all levels working requirement, so that buffer the hydraulic cylinder while working

4. Utilizes Siemens motor to ensure a extend type high efficient vibrotechnique, the concrete product will be high strength and density caused by adjusted running speed.

5. Raw material feeder is designed by multi-shaft at 360 degree and compulsory feeding, The raw material can be blended evenly to make the blocks with optimal density and intensity, applied to a variety of moulds.

6. All sensor and limited switch are used international well-known brand PEPPERL+FUCHS and Autonics

Capacity for each type machine:

We have various size of block making machines to meet different requirement, if you need information in detail, please feel free to contact us at sales@unikmachinery.com.

Why choose unik？

1.Advanced equipment technology
2.fully automated operation
3.Raw materials are widely used.
4.There are various types of machine that cater to different requirements
5.After-sales service is perfect will save you much trouble during production

6.To produce high-quality bricks, we must not only choose advanced and fully automatic brick machine production lines, but also operate in strict accordance with the requirements of the production process, and do a good job in the management of production, especially the operation and management of personnel. We will also help you Continue to update more problems and solutions.

With a large number of professional and technical personnel, after years of unremitting efforts, we can meet the different investment needs of users. With exquisite technology and excellent quality, it has won several national patents and its products are spread all over the country.

Block Machine Equipment is the mechanical equipment for the production of bricks, generally using stone powder, fly ash, slag, slag, gravel, sand, water, etc. as raw materials. Brick machine equipment is usually a general term for a series of brick-making machinery and equipment for the production of color bricks, cement bricks and other wall materials for the building materials industry. According to the different materials of the product, it can be divided into cement brick making machine, fly ash brick making machine, clay brick machine, etc.; According to the production process, it can be divided into unburned brick machine, hollow brick machine, aerated foam brick machine, concrete brick machine, etc. According to the different forming principles, it can be divided into: pneumatic brick machine, vibrating brick machine, hydraulic brick machine; According to the degree of automation, it can be divided into: automatic, semi-automatic, manual brick machine; According to the size of the output, it can be divided into: large, medium and small brick machines.