Cement block brick making machine

Cement Block Brick Making Machine

The cement block brick making machine is a mechanical device designed to produce concrete blocks, bricks, and pavers. It uses cement, sand, and water as raw materials and can produce blocks and bricks of various sizes and shapes by changing the molds. The machine is equipped with a hydraulic system that applies pressure to the mold to produce high-quality bricks and blocks. It is widely used in the construction industry for building walls, roads, and other structures.

Cement block brick making machine is very scientific and very reasonable design,used hydraulic transmission principle,By linking the automatic transfer board system, feeding and dosing system, as well as the  intelligent system  and so on, we can effectively achieve fully automated operation . Also, we can make the production efficiency of entire brick machine reached a large amount production. The quality of the produced cement bricks are also very good and stable.

The appearance quality should meet the following requirements:

1. The paint should be even, smooth and shiny. The surface should be dry, not sticky, and free of wrinkles, peeling, paint leakage, flow marks, bubbles, etc.

2. The cover should not have hammer marks exceeding 15mm or surface protrusions, the edges should be rounded and smooth, and the installation position should be correct, firm and reliable.

3. The exposed parts of the parts should be treated with rust prevention, and the surface of the castings should be smooth and smooth, and there should be no flash burrs, such as blisters, pores, and protruding appetites.

4. The welding seam should be beautiful, and there should be no missing welding, cracks, arc craters, slag inclusion, etc., and the width of the same welding seam should be the same.

Equipments for basic concrete block making plant

In order to ensure that our products are always in good working condition during the use process, the company has made the following service requirements on the basis of strictly implementing GB/T1678.1-1997 "industrial products after-sales service" standards:
1. The warranty period is 12 months or 2000 hours.
2. Freely train the operation, maintenance and management personnel for the customer.
3. Respond to relevant customer inquiries in a timely manner.
4. Provide relevant documents and materials to customers.
5. Perform product quality responsibility and provide on-site services such as installation, commissioning and maintenance to customers in a timely manner.
6. Create customer files and track product usage.
7. After the contract takes effect, the customer is responsible for the construction of the supporting facilities and foundation pre-buried by the company, and the main cable is led to the main cabinet; the water source is led to the mixer. Our company provides the complete machine certificate for the equipment.
8. After the customer base is self-accepted, if the customer does not have the conditions to force installation or needs to be re-installed, the customer should sign in writing and the company will charge the corresponding fee.
9. Due to partial improvement and process improvement under the contract, our company has the right to make new designs and improvements without degrading the performance of the original equipment. If the physical object of the contract is different from the contract information, the actual product shall prevail, but the quality level of the equipment shall not be lowered.