Small Cement Block Machine

Small cement block machine

 A small cement block machine is a machine used for producing cement blocks or bricks. It is usually equipped with a concrete mixer, a conveyor belt, and a brick molding machine. The machine works by mixing cement, sand, and water to form a concrete mixture, which is then molded into blocks of different shapes and sizes. These blocks are then cured and dried before they can be used for construction purposes. Small cement block machines are ideal for small-scale construction projects or for use in areas where a larger machine cannot be easily transported.

It mainly produces all kinds of special-shaped concrete blocks, reinforcing steel supporting blocks, mainly used for cast-in-place of buildings, highways, railways, bridges and ancient buildings, reinforced concrete protective layer blocks, beam supports, and standard spacing of reinforcing steel bars and so on, the quality of the cement reinforced concrete pad plays an important role in the project quality, is directly related to the bearing capacity, durability, acid and alkali resistance, fire prevention, etc. At present, irregular reinforced cement mortar pads have been eliminated in developed countries, and plastic reinforcement pads have also been banned due to various defects. The small cement block machine produces standard type concrete reinforced protective layer pads.

Small Cement Block Machine Main features:

◇The block forming body is made of strong square steel welding. The small hollow brick machine is strong and vibration resistant, and the working stability is very good.

◇Germany Siemens motor, autonics sensors and controllers ,Schneider electrical components and Japan Omron PLC system

◇The control system uses PLC liquid crystal display man-machine interface, remote control, automatic fault diagnosis, and targeted application software to make its operation more intelligent.

◇Compact structure, simple operation, easy maintenance,

◇Double motor synchronous vibration molding, short cycle time, high efficiency

Small Cement Block Machine Technical specification:

In order to ensure that our products are always in good working condition during the use process, the company has made the following service requirements on the basis of strictly implementing GB/T1678.1-1997 "industrial products after-sales service" standards:
1. The warranty period is 12 months or 2000 hours.
2. Freely train the operation, maintenance and management personnel for the customer.
3. Respond to relevant customer inquiries in a timely manner.
4. Provide relevant documents and materials to customers.
5. Perform product quality responsibility and provide on-site services such as installation, commissioning and maintenance to customers in a timely manner.
6. Create customer files and track product usage.
7. After the contract takes effect, the customer is responsible for the construction of the supporting facilities and foundation pre-buried by the company, and the main cable is led to the main cabinet; the water source is led to the mixer. Our company provides the complete machine certificate for the equipment.
8. After the customer base is self-accepted, if the customer does not have the conditions to force installation or needs to be re-installed, the customer should sign in writing and the company will charge the corresponding fee.
9. Due to partial improvement and process improvement under the contract, our company has the right to make new designs and improvements without degrading the performance of the original equipment. If the physical object of the contract is different from the contract information, the actual product shall prevail, but the quality level of the equipment shall not be lowered.