brick block machinery

brick block machinery Features:

1.The automatic concrete block forming machine has reasonable design, compact structure, realizes directional vibration, frequency conversion brake, and immediately eliminates energy consumption, without manual laying of cloth, which greatly reduces labor intensity.
2.up and down pressure, strong vibrating, especially suitable for high-strength block production, can be stacked after forming (3-5 layers).
3. the body uses advanced welding technology, made of high-strength steel and special materials, strong and vibration-resistant.
4. Fully automatic concrete block forming machine supports new technology, and the vibration force can reach various high-strength load-bearing blocks and non-load-bearing blocks.
5. this model "telecom communication control system, it provides great convenience for remote monitoring, fault inquiry and program upgrade, etc.
6. The vibration table integration and full synchronous vibration technology enable the machine to achieve the best tapping effect.
7. Adopt multi-rod guiding method and super-abrasive material to ensure accurate movement of mold and indenter.

In addition, the Kenyan government has increased investment in infrastructure projects such as roads, bridges, railways, ports and airports, which have created a large demand for cement brick machines. Although Kenya's domestic cement production capacity is expanding rapidly, compared with the rapid growth of domestic cement consumption, the growth rate of supply is still relatively slow, which provides investment opportunities for Chinese companies.

Product	Product size	pcs/pallet	pcs/hour	Image
Hollow block	400x200x200mm	6 PCS	1920PCS
Hollow block	400x150x200mm	8 PCS	1440 PCS
Rectangular paver	200x100x60/80mm	28PCS	5040 PCS
Interlocking paver	225x112x60/80mm	20PCS	3600PCS
Kerbstone	200x300x600mm	2PCS	480PCS

1. Mixing time: The longer the mixing time, the more uniform the mixing. Dry mixing for 20 minutes increases the strength by 15-23% compared to 10 minutes; wet mixing time is suitable for materials not to clump. The storage time of the mixed materials is preferably about 2 hours. Too long or too short a time will reduce the compressive strength of the bricks.
2. Molding pressure: The pressure of clay cement bricks during molding is about 500 kg/cm2. Under this pressure, the product has high compressive strength and good water resistance. If the pressure is too low, it is not easy to compact.
3. Curing conditions: Clay cement bricks are generally protected from sunlight. The strength of natural curing for 7 days in the sun is equivalent to 67-90% of the strength of 28 days; the strength of 28 days is 80-95% of the strength of one quarter. Therefore, if the curing site is small, clay cement bricks can be shipped after 7 days of natural curing.